I ordered a  set of shorty levers from Amazon for $39.99, they are for 2009-2014 Versys.


They both fit perfect but, you have to use the brass insert for the clutch. The brake will not push the switch in so the brake light stays on all the time, and fully pulled it bottoms out and you only get about 70% of the brake.
I drilled the lever where it touches the reservoir plunger with a 11/64″ drill then tapped with M5x.80 threads, then added a M5 button top screw. Now there is an adjustable screw with a rounded top that pushes against the plunger. It now touches the brake switch correctly, and the brake is solid when pulled in.