I have wanted to get rid of that contraption of a tag mount that comes stock on the Versys.


Stock Tag Assembly

And there are not very many options to change it, and they are ridiculously overpriced.
So I decided to make my own. It took about 30 minutes and some scrap stainless steel (I’m going to make another one that is welded (not bolted) and with blinker mounts). Below is what it looks like.

img_1151 img_1152

And this is what it looks like mounted, it use’s the same bolts as the stock one, with a hole for the tag light bolts (installed later).